(A) cause damage to the battery
Laptop battery a long time, I am often dissatisfied with battery charge, and even show the battery is damaged, specific performance is larger resistance in the charging voltage rises faster at both ends. So easy to determine the charge control circuit has been filled, the capacity falls. Since relatively large battery internal resistance, discharge voltage drop, high speed, so the system is not easily mistaken for voltage, low battery. In that relatively short Camcorder Battery SHARP VL-E720 life, should take appropriate measures.
(B) the battery refresh program to restore the battery discharge time
Big brand laptop has a battery refresh program, we can use it to repair the battery. For example: a IBMThinkpad390/262650 based laptop, the battery with a nickel-metal hydride (Ni-Mh) batteries, as usual charge and discharge properly, causing the battery discharge time is short, only less than 5 minutes, if carrying a laptop to work, then it is very inconvenient, what can restore the battery discharge time?
For the above, we can use the IBM has launched a Canon xm1 Battery refresh program to refresh the battery to discharge recovery time, specifically as follows.
(1) the use of AC power to the notebook computer, download the first provided by IBM TP390/390e/390x series laptop battery refresh program.
(2) Restart your computer, press F8 to enter boot menu, and select safe DOS mode.
(3) into the directory where the file you just downloaded, perform a Panasonic Nv-mx5 Battery refresh program isbr0lww, exe, reading the warning message, insert the floppy disk as required, and then press the Enter key to execute the self-extracting operations.
(4) Boot the computer with this floppy disk, the screen StartingPC-DOS. . . Prompt information.
(5) Follow the prompts to unplug the AC power, the program will automatically Ni-Mh battery discharge, the discharge is completed, the system will automatically shut down.
(6) The Canon Digital Ixus 430 Battery temperature is high at this time, should not immediately start, let the battery cool for a while, plug the AC power.
(7) Boot the computer with a floppy disk, the Autoexec. bat file will run automatically refresh program, and asks the user whether to proceed. Select yes and press Enter.
(8) At this point, the program began to refresh the battery refresh, the process soon, when the returns to the DOS prompt A:> when that refresh is complete.
(9) Turn off the computer and charge the battery until the light turns green so far.
(10) The above procedure was repeated three times to get the best results.
In addition, many lithium Acer Aspire 9301awsmi Battery pack failure is the result of a failure of energy-saving core, this phenomenon can not be avoided. Because each cell batteries can not be exactly the same nature, with some slightly lower quality long after the beginning of aging, and destroyed the whole (the series after) the discharge curve. Interest and ability of the reader can try to open the battery pack, with the help of the multimeter, you can quickly find the damaged batteries (abnormal voltage). If conditions permit, according to the corresponding parameters of replacement Canon Np-e3 batteries can be qualified product.
2012/01/31
2012/01/09
Good to be true of the super-durable laptop
Accumulation of some of the ideas in his head that he was not any way to prove feasible in practice, always wanted to write out, but no time, and also his real lazy, saw some time ago called "50 days of the World" lecture video, which Yao Renlu Mr. said a word, I understand probably means "not necessarily share the rewards, but valuable, but if you do not share the point values are not."
In college, always think they will make a whim, they have many opportunities, now arrogant enough to think about their junior year students went to surmise an idea and the community to find so-called "partners", remember that is also a business near the brothers just told us: "When you think of an idea when that idea is very strange, very new, you will achieve when you know there must be 100 people in front of you thought, and it was already practiced, but you do not know it ", then in line to see Ma in the" Win in China "in such an assessment," first-class creative, third-rate execution; third-rate ideas, first-class execution. I prefer the latter. "
Having said that, that is, would like to share under their own ideas, even the best ideas, the practice did not pay a great price is not successful, not only makes you a little more aloof and self-inflated the value of nothing. To think of themselves as each idea is to share in the hope that valuable to see friends, to "step foot", has been done and the success of a friend, to "step foot" that did not value purely whimsical friends, but also "take a turn," Thank you very much in the first. Because this is what I share this whimsical value.
First, the super-rugged laptop
Why it must be empty computer, through the air cooling it, is there such a material is solid under normal circumstances, with insulation, thermal conductivity and strong, more radiation (looks like the air is very radiation), can best be little flexibility, such as "adhesive", filled with such material board laptop and all interfaces, so that both computers waterproof, dustproof, shockproof, and no fan noise, because the entire computer with a quite heat sink, of course, do not be too hot, the location of operation, this material also needs to be able in certain circumstances can become gaseous or liquid, or can be easily separated from the computer for easy maintenance and updates. I think if there is such a computer, I would consider buying, not too expensive like, do not know the friends you think?
I also believe that any creation, the beginning is a whimsical joke.
related tags: Panasonic Nv-gs27 camcorder Battery, Acer Aspire One ao532h-2db Battery, Universal External Battery, Jvc Gr-c1u camcorder Battery , DOPOD 818 Pro PDA battery, TOSHIBA SATELLITE 4005 Laptop AC Adapter, Panasonic Lumix Dmc-fx7 Series Battery, Acer Aspire 4738z Battery
In college, always think they will make a whim, they have many opportunities, now arrogant enough to think about their junior year students went to surmise an idea and the community to find so-called "partners", remember that is also a business near the brothers just told us: "When you think of an idea when that idea is very strange, very new, you will achieve when you know there must be 100 people in front of you thought, and it was already practiced, but you do not know it ", then in line to see Ma in the" Win in China "in such an assessment," first-class creative, third-rate execution; third-rate ideas, first-class execution. I prefer the latter. "
Having said that, that is, would like to share under their own ideas, even the best ideas, the practice did not pay a great price is not successful, not only makes you a little more aloof and self-inflated the value of nothing. To think of themselves as each idea is to share in the hope that valuable to see friends, to "step foot", has been done and the success of a friend, to "step foot" that did not value purely whimsical friends, but also "take a turn," Thank you very much in the first. Because this is what I share this whimsical value.
First, the super-rugged laptop
Why it must be empty computer, through the air cooling it, is there such a material is solid under normal circumstances, with insulation, thermal conductivity and strong, more radiation (looks like the air is very radiation), can best be little flexibility, such as "adhesive", filled with such material board laptop and all interfaces, so that both computers waterproof, dustproof, shockproof, and no fan noise, because the entire computer with a quite heat sink, of course, do not be too hot, the location of operation, this material also needs to be able in certain circumstances can become gaseous or liquid, or can be easily separated from the computer for easy maintenance and updates. I think if there is such a computer, I would consider buying, not too expensive like, do not know the friends you think?
I also believe that any creation, the beginning is a whimsical joke.
related tags: Panasonic Nv-gs27 camcorder Battery, Acer Aspire One ao532h-2db Battery, Universal External Battery, Jvc Gr-c1u camcorder Battery , DOPOD 818 Pro PDA battery, TOSHIBA SATELLITE 4005 Laptop AC Adapter, Panasonic Lumix Dmc-fx7 Series Battery, Acer Aspire 4738z Battery
2012/01/07
Lithium battery charge circuit
Lithium is the second nickel-cadmium, nickel metal hydride battery, rechargeable battery family in the crowd. Lithium-ion Apple a1280 Battery for its excellent properties, are widely used: mobile phones, camcorders, notebook computers, cordless phones, power tools, remote control or electric toys, cameras and other portable electronic devices.
First, lithium and nickel-cadmium, nickel metal hydride rechargeable batteries:
Lithium-ion battery is extremely negative graphite crystal, lithium dioxide cathode typically. Rechargeable lithium-ion movement from the cathode to the anode embedded in graphite layer. Discharge, lithium ions from the graphite anode surface from the crystal towards the cathode. Therefore, in the process of charging and discharging of the lithium battery is always there to form lithium-ion, lithium rather than the form appears. Thus the battery called lithium-ion ACER Aspire 5570 Laptop AC Adapter battery, lithium battery short.
Lithium has: small size, high capacity, light weight, non-polluting, single high voltage, low self-discharge, battery cycles than the advantages, but more expensive. Nickel-cadmium batteries for low-capacity, self-discharge severe, and pollution of the environment, are gradually being phased out. Nickel-metal hydride batteries with high performance and low cost, and does not pollute the environment, but only a single voltage 1.2V, which is subject to restrictions in the use of.
Second, the characteristics of lithium Panasonic Lumix Dmc-fz20 Battery:
1, has a higher energy than the weight, volume energy ratio;
2, high voltage, single-cell Lithium Ion battery voltage of 3.6V, equal to three nickel-cadmium or nickel metal hydride rechargeable batteries in series voltage;
3, the self-discharge small can store a long time, this is the most prominent advantages of the battery;
4, no memory effect. Lithium does not exist the so-called nickel-cadmium battery memory effect, so no need to discharge before charging lithium batteries;
5, long life. Under normal operating conditions, the lithium battery charge / discharge cycles greater than 500;
6, can be quickly charged. Lithium Camcorder Battery SONY NP-F330 can usually use 0.5 to 1 times the capacity of the current charge, the charge time reduced to 1 to 2 hours;
7, free to be used in parallel;
8, the battery does not contain cadmium, lead, mercury and other heavy metals, environmental pollution, is the most advanced green batteries;
9, the cost is high. Compared with other rechargeable batteries, lithium batteries expensive.
Third, the internal structure of lithium:
There are usually two lithium batteries appearance: cylindrical and rectangular.
Spiral wound battery internal structure, with a very fine and highly permeable polyethylene film isolation material in the positive and negative interval from. Cathode including lithium cobalt dioxide and lithium-ion composition of the aluminum film collector and the composition of the current collector. Formed by a sheet of carbon anode materials of lithium ion collector and copper current collector composed of thin-film form. The Canon Uc-x55hi Battery is filled with organic electrolyte solution. PTC also equipped with safety valves and components for battery when not in the normal state and output short circuit protection of the battery from damage.
A single lithium battery voltage of 3.6V, the capacity can not be infinite, therefore, often a single lithium battery for series and parallel processing to meet the requirements of different occasions. 5 string
Fourth, the battery charge and discharge requirements;
1, the lithium battery charge: According to the structural characteristics of lithium batteries, the maximum charge voltage should be 4.2V, not over-charge, otherwise they will take away too much lithium-ion cathode, leaving the battery scrap. The higher charge and discharge, can be a dedicated constant current, constant voltage charging. Usually constant current charge to 4.2V / Festival into the constant voltage charging, when the constant voltage charging current to 100mA or less, they should stop charging.
Charge current (mA) = 0.1 ~ 1.5 times the Canon CB-2LTE Charger battery capacity (such as the 1350mAh battery, the charging current can be controlled between 135 ~ 2025mA). Conventional option of charging current is about 0.5 times the battery capacity, charging time is about 2 to 3 hours.
2, the lithium battery discharge: the internal structure caused by lithium batteries, lithium-ion discharge can not all move to the cathode, must be retained as part of lithium ion in the negative, to ensure that the next charging lithium-ion can be embedded in channel flow. Otherwise, the battery life will be shortened accordingly. Graphite layer in order to ensure the left part of the lithium-ion discharge, the minimum necessary to strictly limit the discharge termination voltage, that lithium SONY DCR-TRV110E Battery can not discharge. Discharge termination voltage is typically 3.0V / section, not be less than 2.5V / section. The length of the battery discharge time and battery capacity, discharge current size. Battery discharge time (hours) = battery capacity / discharge current. Lithium battery discharge current (mA) should not exceed three times the battery capacity. (Such as the 1000mAH battery, the discharge current should be strictly controlled in less than 3A) otherwise it would damage the battery.
Currently on the market for sale lithium batteries are sealed inside a complete charge and discharge protection board. As long as the good control of the external charge and discharge currents can be.
Fifth, lithium battery protection circuit:
Two lithium Acer Aspire 7730 Battery charge and discharge protection circuit shown in Fig. And by the special protection of two FET manifold S - 8232 composition, overcharge and over discharge control tube FET2 control tube FET1 series in the circuit, the protection IC monitors the battery voltage and control, when the battery voltage rises to 4.2V , over charging protection tube FET1 end, stop charging. To prevent malfunction, plus a general delay outside the circuit capacitance. When the battery is discharged, the battery voltage down to 2.55V, the over-discharge control tube FET1 deadline to stop power to the load. Overcurrent protection is greater when the load current flows, control FET1 to end, to stop the load discharge, the purpose is to protect the HP Compaq Business Notebook 6715b Laptop AC Adapter battery and the FET. Over-current detection is the use of FET on-resistance as a sense resistor to monitor its voltage drop, when the voltage drop exceeds a set value to stop the discharge. General increase in the circuit have also delay circuit to distinguish between inrush current and short circuit current. The circuit is fully functional, reliable performance, but professional, and special manifold is not easy to buy, easy amateur imitation.
Six, simple charging circuit:
Many businesses are now sold without charging a single-board lithium battery. Its superior performance, low cost, can be used for self-maintenance products and substitution of lithium batteries, so well received by the electronic lovers. Interested readers can refer to Figure II produced a charge sheet. The principle is: the use of a constant voltage to charge the Fujifilm Finepix 50i Battery, ensure that no overcharge. Input DC voltage higher than the voltage of 3 volts to charge the battery. R1, Q1, W1, TL431 adjustable precision voltage regulator circuit components, Q2, W2, R2 constitute the adjustable constant current circuit, Q3, R3, R4, R5, LED indication for charging circuit. With the rechargeable battery voltage is increased, the charge current will gradually decrease until the battery is fully charged the voltage drop on R4 will be reduced, so that the Q3 ended, LED will be extinguished, in order to ensure the battery can be sufficient, please continue after the lights go out 1-2 hour charge. Please use to Q2, Q3 installed the right radiator. The advantage of this circuit are: making a simple, easy to purchase components, charging safety, visual display, and will not damage the battery. W1 by changing multiple-series Li-ion Canon Nb-8l Battery can be charged, the charge current can be changed W2 for a wide range of adjustment. The disadvantage is: No over-discharge control circuit. Figure 3 shows the diagram of the charge of the PCB board (component side view from the perspective).
Seven, for example a single lithium battery applications
1, substitution of products for battery maintenance
There are many batteries: laptops such as the kind used by the service found that the battery pack is damaged when the Sony DCR-HC18E Charger battery is only an individual problem. You can choose an appropriate single lithium battery.
2, making mini flashlight highlighted
I have used a single 3.6V1.6AH lithium battery with ultra-bright white LED flashlight made of a miniature, easy to use, compact appearance. And because the battery capacity, the average nightly use of a half-hour, has been charged with two months still no. Circuit shown in Fig.
3, instead of 3V power supply
As a single lithium battery voltage is 3.6V. Therefore, only one lithium battery can be replaced by two ordinary SONY NP-QM71 Battery , the radio, Walkman, camera and other small household electrical appliances power, not only lightweight, and continuous use for a long time.
Eight lithium batteries to save:
Lithium batteries to be fully charged and save. Can be stored at 20 ℃ for more than six months, showing that lithium batteries suitable for low temperature preservation. It has been suggested to rechargeable batteries in the refrigerator freezer to save, is indeed a good idea.
Nine, Caution:
Lithium battery must not be disintegrated, drilling, piercing, sawing, pressure, heat, or they may cause serious consequences. No charge lithium protection board can not short circuit, do not play for children. Not near flammable chemicals. To properly handle the retirement of lithium. Fourth, the battery charge and discharge requirements;
1, the lithium battery charge: According to the structural characteristics of lithium Acer Aspire 3680 Battery, the maximum charge voltage should be 4.2V, not over-charge, otherwise they will take away too much lithium-ion cathode, leaving the battery scrap. The higher charge and discharge, can be a dedicated constant current, constant voltage charging. Usually constant current charge to 4.2V / Festival into the constant voltage charging, when the constant voltage charging current to 100mA or less, they should stop charging.
Charge current (mA) = 0.1 ~ 1.5 times the Olympus Blm-1 Battery capacity (such as the 1350mAh battery, the charging current can be controlled between 135 ~ 2025mA). Conventional option of charging current is about 0.5 times the battery capacity, charging time is about 2 to 3 hours.
2, the lithium battery discharge: the internal structure caused by lithium batteries, lithium-ion discharge can not all move to the cathode, must be retained as part of lithium ion in the negative, to ensure that the next charging lithium-ion can be embedded in channel flow. Otherwise, the battery life will be shortened accordingly. Graphite layer in order to ensure the left part of the lithium-ion discharge, the minimum necessary to strictly limit the discharge termination voltage, that lithium batteries can not discharge. Discharge termination voltage is typically 3.0V / section, not be less than 2.5V / section. The length of the battery discharge time and KENWOOD TH77 battery capacity, discharge current size. Battery discharge time (hours) = battery capacity / discharge current. Lithium battery discharge current (mA) should not exceed three times the battery capacity. (Such as the 1000mAH battery, the discharge current should be strictly controlled in less than 3A) otherwise it would damage the battery.
Currently on the market for sale lithium batteries are sealed inside a complete charge and discharge protection board. As long as the good control of the external charge and discharge currents can be.
The charger system in Shenzhen Super Power Electronic Co., Ltd manufacture, packaging box has the following description:
Implementation of National standard: GB4943-2001
Performance:
Input: 220V, 50Hz/60Hz 50mA output: DC4.2V 220mA ± 80mA
Features:
1, suitable for 250-3000mAH capacity lithium-ion cell phone 3.6V (Li-ion) SAMSUNG VP-D371W Charger battery.
2, switching power supply design to meet a wide 150-265V AC voltage supply.
3, the use of microcomputer chips accurately detect the charging process and control.
4, the charge is safe, reliable, automatic shutdown charge saturation.
5, beautiful appearance, compact, portable, simple operation and practical, the vast majority of cell phone lithium-ion battery 3.6V (Li-ion) batteries.
Open the box, charger shape shown.
Out of curiosity, I opened the charger. Their work carefully, neatly arranged components, the components are marked with the number and size of the value, the AC input and DC output also made a marked and labeled "CLT-688", "2004.11.18" message. PCB is also doing very beautiful. Shown in Fig.
I draw a circuit diagram according to the physical, as shown below (click on picture to see enlarged circuit), and a simple analysis as follows:
The circuit is very simple, using a piece of software packages marked with the AE3102 manifold and the words, through its 8-pin analysis, is the integration of the two op amps.
Switching power supply using suppression-type oscillation switching power supply, it simply works into the 220V AC rectifier peak voltage of about 300V triangle (do not filter capacitor C1), the use of component-level switching regulator control switch Q1 of the oscillation and stop. The switching power supply primary current is very small, Q1's very anti-C and lower peak voltage, so you can use Vceo greater than 300V TO-92 package of small-scale switch to reduce the volume to reduce costs.
Switching power supply:
Q1 and switching transformers intermittent oscillator. After power charger, 220V mains half-wave rectified by the D1 C-pole on the Q1 form a DC voltage of about 300V through transformer primary pole added to the C Q1, but also by the start of the voltage resistance R2 of the Q1 B pole to provide a bias voltage. As the positive feedback effect, Q1 rise in the IC rapid saturation in Q1 into saturation during the switching transformer secondary winding voltage to the induced D2 turns on, the load output to a DC voltage of about 9V or so. Switches the feedback transformer winding by the induced pulse rectifier D3, C2 and filtered to produce a number of oscillation pulses proportional to the DC voltage. If this voltage exceeds the voltage regulator value Z1, Z1 will turn this negative voltage rectifier Q1 will be added to the B-pole, it rapidly closing. Cut-off time of Q1 and its output voltage inversely proportional. The turn-Z1 / directly affected by the cut-off voltage and load effects: the lower the voltage or load current increases, Z1's on-time shorter, Q1's turn-the longer the other hand, the higher the voltage or load current smaller, D3 of the rectifier voltage is higher, Z1 longer conduction time, Q1 on-time shorter.
Charging part:
Mobile phone Canon Bp-511 Battery residual voltage (about 3V) by R17, R15 partial pressure, (1.3V) added to the IC (AE3102) ③ feet, cell phone battery residual voltage is simultaneously lit by R16 LED1, by LED1 Regulated voltage (1.8V ) added to the IC ② feet, this voltage is lower than the IC ③ pin voltage, IC ① pin output low. This low level so that Q2 turns on, charging. LED1 R8's role is to make the regulator more stable value, LED1 while for power indication.
Section Ⅱ the IC op amp and ④ oscillator circuit composed of the C5 foot. ⑦ feet by the square wave oscillator output through R12 to LED2 flashing, indicating charging.
As the battery voltage rises, when by R17, R15 after the partial pressure of (③ pin) voltage regulator than LED1 (② feet) voltage, IC ① pin output high, close to Q2, and LED3 lights indicate charging the end. At this point, LED2 off.
D4 is reverse to prevent damage to the Canon Nb-8l Battery circuit; R18 is the over-current fusible resistor; R6 is small after the end of the charging current supplement use, instruction manual required this time about 0.5 hours.
Multi-part:
The battery charger is convenient to use the clip, the two electrodes can be separated from any size, to adapt to a variety of cell phone lithium battery. PHS also left in the charger side of the charging port. The other side of the charger, there is a polarity switch, polarity and charge only the battery polarity matches, the test light will light up LED1
First, lithium and nickel-cadmium, nickel metal hydride rechargeable batteries:
Lithium-ion battery is extremely negative graphite crystal, lithium dioxide cathode typically. Rechargeable lithium-ion movement from the cathode to the anode embedded in graphite layer. Discharge, lithium ions from the graphite anode surface from the crystal towards the cathode. Therefore, in the process of charging and discharging of the lithium battery is always there to form lithium-ion, lithium rather than the form appears. Thus the battery called lithium-ion ACER Aspire 5570 Laptop AC Adapter battery, lithium battery short.
Lithium has: small size, high capacity, light weight, non-polluting, single high voltage, low self-discharge, battery cycles than the advantages, but more expensive. Nickel-cadmium batteries for low-capacity, self-discharge severe, and pollution of the environment, are gradually being phased out. Nickel-metal hydride batteries with high performance and low cost, and does not pollute the environment, but only a single voltage 1.2V, which is subject to restrictions in the use of.
Second, the characteristics of lithium Panasonic Lumix Dmc-fz20 Battery:
1, has a higher energy than the weight, volume energy ratio;
2, high voltage, single-cell Lithium Ion battery voltage of 3.6V, equal to three nickel-cadmium or nickel metal hydride rechargeable batteries in series voltage;
3, the self-discharge small can store a long time, this is the most prominent advantages of the battery;
4, no memory effect. Lithium does not exist the so-called nickel-cadmium battery memory effect, so no need to discharge before charging lithium batteries;
5, long life. Under normal operating conditions, the lithium battery charge / discharge cycles greater than 500;
6, can be quickly charged. Lithium Camcorder Battery SONY NP-F330 can usually use 0.5 to 1 times the capacity of the current charge, the charge time reduced to 1 to 2 hours;
7, free to be used in parallel;
8, the battery does not contain cadmium, lead, mercury and other heavy metals, environmental pollution, is the most advanced green batteries;
9, the cost is high. Compared with other rechargeable batteries, lithium batteries expensive.
Third, the internal structure of lithium:
There are usually two lithium batteries appearance: cylindrical and rectangular.
Spiral wound battery internal structure, with a very fine and highly permeable polyethylene film isolation material in the positive and negative interval from. Cathode including lithium cobalt dioxide and lithium-ion composition of the aluminum film collector and the composition of the current collector. Formed by a sheet of carbon anode materials of lithium ion collector and copper current collector composed of thin-film form. The Canon Uc-x55hi Battery is filled with organic electrolyte solution. PTC also equipped with safety valves and components for battery when not in the normal state and output short circuit protection of the battery from damage.
A single lithium battery voltage of 3.6V, the capacity can not be infinite, therefore, often a single lithium battery for series and parallel processing to meet the requirements of different occasions. 5 string
Fourth, the battery charge and discharge requirements;
1, the lithium battery charge: According to the structural characteristics of lithium batteries, the maximum charge voltage should be 4.2V, not over-charge, otherwise they will take away too much lithium-ion cathode, leaving the battery scrap. The higher charge and discharge, can be a dedicated constant current, constant voltage charging. Usually constant current charge to 4.2V / Festival into the constant voltage charging, when the constant voltage charging current to 100mA or less, they should stop charging.
Charge current (mA) = 0.1 ~ 1.5 times the Canon CB-2LTE Charger battery capacity (such as the 1350mAh battery, the charging current can be controlled between 135 ~ 2025mA). Conventional option of charging current is about 0.5 times the battery capacity, charging time is about 2 to 3 hours.
2, the lithium battery discharge: the internal structure caused by lithium batteries, lithium-ion discharge can not all move to the cathode, must be retained as part of lithium ion in the negative, to ensure that the next charging lithium-ion can be embedded in channel flow. Otherwise, the battery life will be shortened accordingly. Graphite layer in order to ensure the left part of the lithium-ion discharge, the minimum necessary to strictly limit the discharge termination voltage, that lithium SONY DCR-TRV110E Battery can not discharge. Discharge termination voltage is typically 3.0V / section, not be less than 2.5V / section. The length of the battery discharge time and battery capacity, discharge current size. Battery discharge time (hours) = battery capacity / discharge current. Lithium battery discharge current (mA) should not exceed three times the battery capacity. (Such as the 1000mAH battery, the discharge current should be strictly controlled in less than 3A) otherwise it would damage the battery.
Currently on the market for sale lithium batteries are sealed inside a complete charge and discharge protection board. As long as the good control of the external charge and discharge currents can be.
Fifth, lithium battery protection circuit:
Two lithium Acer Aspire 7730 Battery charge and discharge protection circuit shown in Fig. And by the special protection of two FET manifold S - 8232 composition, overcharge and over discharge control tube FET2 control tube FET1 series in the circuit, the protection IC monitors the battery voltage and control, when the battery voltage rises to 4.2V , over charging protection tube FET1 end, stop charging. To prevent malfunction, plus a general delay outside the circuit capacitance. When the battery is discharged, the battery voltage down to 2.55V, the over-discharge control tube FET1 deadline to stop power to the load. Overcurrent protection is greater when the load current flows, control FET1 to end, to stop the load discharge, the purpose is to protect the HP Compaq Business Notebook 6715b Laptop AC Adapter battery and the FET. Over-current detection is the use of FET on-resistance as a sense resistor to monitor its voltage drop, when the voltage drop exceeds a set value to stop the discharge. General increase in the circuit have also delay circuit to distinguish between inrush current and short circuit current. The circuit is fully functional, reliable performance, but professional, and special manifold is not easy to buy, easy amateur imitation.
Six, simple charging circuit:
Many businesses are now sold without charging a single-board lithium battery. Its superior performance, low cost, can be used for self-maintenance products and substitution of lithium batteries, so well received by the electronic lovers. Interested readers can refer to Figure II produced a charge sheet. The principle is: the use of a constant voltage to charge the Fujifilm Finepix 50i Battery, ensure that no overcharge. Input DC voltage higher than the voltage of 3 volts to charge the battery. R1, Q1, W1, TL431 adjustable precision voltage regulator circuit components, Q2, W2, R2 constitute the adjustable constant current circuit, Q3, R3, R4, R5, LED indication for charging circuit. With the rechargeable battery voltage is increased, the charge current will gradually decrease until the battery is fully charged the voltage drop on R4 will be reduced, so that the Q3 ended, LED will be extinguished, in order to ensure the battery can be sufficient, please continue after the lights go out 1-2 hour charge. Please use to Q2, Q3 installed the right radiator. The advantage of this circuit are: making a simple, easy to purchase components, charging safety, visual display, and will not damage the battery. W1 by changing multiple-series Li-ion Canon Nb-8l Battery can be charged, the charge current can be changed W2 for a wide range of adjustment. The disadvantage is: No over-discharge control circuit. Figure 3 shows the diagram of the charge of the PCB board (component side view from the perspective).
Seven, for example a single lithium battery applications
1, substitution of products for battery maintenance
There are many batteries: laptops such as the kind used by the service found that the battery pack is damaged when the Sony DCR-HC18E Charger battery is only an individual problem. You can choose an appropriate single lithium battery.
2, making mini flashlight highlighted
I have used a single 3.6V1.6AH lithium battery with ultra-bright white LED flashlight made of a miniature, easy to use, compact appearance. And because the battery capacity, the average nightly use of a half-hour, has been charged with two months still no. Circuit shown in Fig.
3, instead of 3V power supply
As a single lithium battery voltage is 3.6V. Therefore, only one lithium battery can be replaced by two ordinary SONY NP-QM71 Battery , the radio, Walkman, camera and other small household electrical appliances power, not only lightweight, and continuous use for a long time.
Eight lithium batteries to save:
Lithium batteries to be fully charged and save. Can be stored at 20 ℃ for more than six months, showing that lithium batteries suitable for low temperature preservation. It has been suggested to rechargeable batteries in the refrigerator freezer to save, is indeed a good idea.
Nine, Caution:
Lithium battery must not be disintegrated, drilling, piercing, sawing, pressure, heat, or they may cause serious consequences. No charge lithium protection board can not short circuit, do not play for children. Not near flammable chemicals. To properly handle the retirement of lithium. Fourth, the battery charge and discharge requirements;
1, the lithium battery charge: According to the structural characteristics of lithium Acer Aspire 3680 Battery, the maximum charge voltage should be 4.2V, not over-charge, otherwise they will take away too much lithium-ion cathode, leaving the battery scrap. The higher charge and discharge, can be a dedicated constant current, constant voltage charging. Usually constant current charge to 4.2V / Festival into the constant voltage charging, when the constant voltage charging current to 100mA or less, they should stop charging.
Charge current (mA) = 0.1 ~ 1.5 times the Olympus Blm-1 Battery capacity (such as the 1350mAh battery, the charging current can be controlled between 135 ~ 2025mA). Conventional option of charging current is about 0.5 times the battery capacity, charging time is about 2 to 3 hours.
2, the lithium battery discharge: the internal structure caused by lithium batteries, lithium-ion discharge can not all move to the cathode, must be retained as part of lithium ion in the negative, to ensure that the next charging lithium-ion can be embedded in channel flow. Otherwise, the battery life will be shortened accordingly. Graphite layer in order to ensure the left part of the lithium-ion discharge, the minimum necessary to strictly limit the discharge termination voltage, that lithium batteries can not discharge. Discharge termination voltage is typically 3.0V / section, not be less than 2.5V / section. The length of the battery discharge time and KENWOOD TH77 battery capacity, discharge current size. Battery discharge time (hours) = battery capacity / discharge current. Lithium battery discharge current (mA) should not exceed three times the battery capacity. (Such as the 1000mAH battery, the discharge current should be strictly controlled in less than 3A) otherwise it would damage the battery.
Currently on the market for sale lithium batteries are sealed inside a complete charge and discharge protection board. As long as the good control of the external charge and discharge currents can be.
The charger system in Shenzhen Super Power Electronic Co., Ltd manufacture, packaging box has the following description:
Implementation of National standard: GB4943-2001
Performance:
Input: 220V, 50Hz/60Hz 50mA output: DC4.2V 220mA ± 80mA
Features:
1, suitable for 250-3000mAH capacity lithium-ion cell phone 3.6V (Li-ion) SAMSUNG VP-D371W Charger battery.
2, switching power supply design to meet a wide 150-265V AC voltage supply.
3, the use of microcomputer chips accurately detect the charging process and control.
4, the charge is safe, reliable, automatic shutdown charge saturation.
5, beautiful appearance, compact, portable, simple operation and practical, the vast majority of cell phone lithium-ion battery 3.6V (Li-ion) batteries.
Open the box, charger shape shown.
Out of curiosity, I opened the charger. Their work carefully, neatly arranged components, the components are marked with the number and size of the value, the AC input and DC output also made a marked and labeled "CLT-688", "2004.11.18" message. PCB is also doing very beautiful. Shown in Fig.
I draw a circuit diagram according to the physical, as shown below (click on picture to see enlarged circuit), and a simple analysis as follows:
The circuit is very simple, using a piece of software packages marked with the AE3102 manifold and the words, through its 8-pin analysis, is the integration of the two op amps.
Switching power supply using suppression-type oscillation switching power supply, it simply works into the 220V AC rectifier peak voltage of about 300V triangle (do not filter capacitor C1), the use of component-level switching regulator control switch Q1 of the oscillation and stop. The switching power supply primary current is very small, Q1's very anti-C and lower peak voltage, so you can use Vceo greater than 300V TO-92 package of small-scale switch to reduce the volume to reduce costs.
Switching power supply:
Q1 and switching transformers intermittent oscillator. After power charger, 220V mains half-wave rectified by the D1 C-pole on the Q1 form a DC voltage of about 300V through transformer primary pole added to the C Q1, but also by the start of the voltage resistance R2 of the Q1 B pole to provide a bias voltage. As the positive feedback effect, Q1 rise in the IC rapid saturation in Q1 into saturation during the switching transformer secondary winding voltage to the induced D2 turns on, the load output to a DC voltage of about 9V or so. Switches the feedback transformer winding by the induced pulse rectifier D3, C2 and filtered to produce a number of oscillation pulses proportional to the DC voltage. If this voltage exceeds the voltage regulator value Z1, Z1 will turn this negative voltage rectifier Q1 will be added to the B-pole, it rapidly closing. Cut-off time of Q1 and its output voltage inversely proportional. The turn-Z1 / directly affected by the cut-off voltage and load effects: the lower the voltage or load current increases, Z1's on-time shorter, Q1's turn-the longer the other hand, the higher the voltage or load current smaller, D3 of the rectifier voltage is higher, Z1 longer conduction time, Q1 on-time shorter.
Charging part:
Mobile phone Canon Bp-511 Battery residual voltage (about 3V) by R17, R15 partial pressure, (1.3V) added to the IC (AE3102) ③ feet, cell phone battery residual voltage is simultaneously lit by R16 LED1, by LED1 Regulated voltage (1.8V ) added to the IC ② feet, this voltage is lower than the IC ③ pin voltage, IC ① pin output low. This low level so that Q2 turns on, charging. LED1 R8's role is to make the regulator more stable value, LED1 while for power indication.
Section Ⅱ the IC op amp and ④ oscillator circuit composed of the C5 foot. ⑦ feet by the square wave oscillator output through R12 to LED2 flashing, indicating charging.
As the battery voltage rises, when by R17, R15 after the partial pressure of (③ pin) voltage regulator than LED1 (② feet) voltage, IC ① pin output high, close to Q2, and LED3 lights indicate charging the end. At this point, LED2 off.
D4 is reverse to prevent damage to the Canon Nb-8l Battery circuit; R18 is the over-current fusible resistor; R6 is small after the end of the charging current supplement use, instruction manual required this time about 0.5 hours.
Multi-part:
The battery charger is convenient to use the clip, the two electrodes can be separated from any size, to adapt to a variety of cell phone lithium battery. PHS also left in the charger side of the charging port. The other side of the charger, there is a polarity switch, polarity and charge only the battery polarity matches, the test light will light up LED1
2011/12/28
by the way with laptop battery
Emphasis on mobility notebook, laptop battery is one of the key, its use has been more and more people pay attention to time, I collected this information about laptop hp compaq mini 700 series battery, and share with you
Let's start talking about the battery materials, batteries used in notebook computers there have been three types: nickel-cadmium batteries, nickel hydrogen batteries, lithium Aspire 3000 battery; they are generally expressed as: Nickel Cadmium Ni-Cd, Ni-MH Ni-MH, lithium Li.
The first notebook to use nickel-cadmium batteries Ni-Cd, Ni-Cd batteries have as many drawbacks, such as: bulky, heavy weight, small size, short life, a memory effect and so on. As well as nickel-cadmium batteries have been eliminated, there is no sense discussing it, we all know about it.
Li batteries are now lithium and Ni-MH Ni-MH two.
I understand that in a senior engineer, lithium actually two, one is lithium, the other is the lithium-ion battery. Lithium in there early before, but not safe when used often in charge when burning, bursting, because the lithium element too active reason. Then there is the improved version of the "lithium-ion HP Compaq 420 battery", the added element lithium can inhibit the active ingredients, so that lithium really achieve a safe, efficient and convenient. The old and therefore out of lithium. As for how to distinguish them from the battery of the label will be able to identify lithium as Li, lithium-ion battery Li-ion. Now, laptops to use the so-called lithium, in fact, lithium-ion battery. Lithium-ion Dell Inspiron 1545 AC Adapter battery charge and discharge times in the 400-600 times, specially modified products, but 800 times. If you charge a daily basis, but also the best battery life of more than two years, the longest notebook battery warranty is one year is also the reason for this Ni-MH battery is the most environmentally friendly battery, environmentally friendly country are vigorously promoting the use of nickel-metal hydride batteries, as easy to recycle, and damage to the environment is minimal. However, compared to nickel-metal hydride batteries and lithium, there are some drawbacks: long charging time, the weight of a more sedate, small capacity than lithium, there is a strong memory effect. It's memory nickel-cadmium batteries, although not as big, but still need to discharge, the user must be exhausted before charging. However, nickel-metal hydride rechargeable dell latitude pp01l battery can reach more than 700 times, some good quality products up to 1200 times charge and discharge, so that more and lithium-ion batteries, lithium batteries live longer than nickel-metal hydride batteries, but also the price of nickel-metal hydride battery much lower than the lithium dell inspiron m501 battery. This is the nickel-metal hydride batteries can be the reason for the corner of the market.
Currently on the market, whether a lithium-ion or nickel metal hydride battery, the size of its capacity in mAh units are, it's Chinese name is ma. MAh size is directly related to the use of laptop time. The greater the laptop but not the longer battery life, which also linked to the notebook's components to determine, such as: CPU, graphics card, etc., using the Centrino CPU, ATI-MOBILITY RADEON graphics cards and many other hardware and use of energy-saving technology P4 CPU, NVIDIA notebook graphics cards compared with the same capacity battery, the former use of time much longer than the latter.
next blog: Worker Captures Alleged Battery Park City Burglar
source from blog: http://batteru.blogspot.com/
Let's start talking about the battery materials, batteries used in notebook computers there have been three types: nickel-cadmium batteries, nickel hydrogen batteries, lithium Aspire 3000 battery; they are generally expressed as: Nickel Cadmium Ni-Cd, Ni-MH Ni-MH, lithium Li.
The first notebook to use nickel-cadmium batteries Ni-Cd, Ni-Cd batteries have as many drawbacks, such as: bulky, heavy weight, small size, short life, a memory effect and so on. As well as nickel-cadmium batteries have been eliminated, there is no sense discussing it, we all know about it.
Li batteries are now lithium and Ni-MH Ni-MH two.
I understand that in a senior engineer, lithium actually two, one is lithium, the other is the lithium-ion battery. Lithium in there early before, but not safe when used often in charge when burning, bursting, because the lithium element too active reason. Then there is the improved version of the "lithium-ion HP Compaq 420 battery", the added element lithium can inhibit the active ingredients, so that lithium really achieve a safe, efficient and convenient. The old and therefore out of lithium. As for how to distinguish them from the battery of the label will be able to identify lithium as Li, lithium-ion battery Li-ion. Now, laptops to use the so-called lithium, in fact, lithium-ion battery. Lithium-ion Dell Inspiron 1545 AC Adapter battery charge and discharge times in the 400-600 times, specially modified products, but 800 times. If you charge a daily basis, but also the best battery life of more than two years, the longest notebook battery warranty is one year is also the reason for this Ni-MH battery is the most environmentally friendly battery, environmentally friendly country are vigorously promoting the use of nickel-metal hydride batteries, as easy to recycle, and damage to the environment is minimal. However, compared to nickel-metal hydride batteries and lithium, there are some drawbacks: long charging time, the weight of a more sedate, small capacity than lithium, there is a strong memory effect. It's memory nickel-cadmium batteries, although not as big, but still need to discharge, the user must be exhausted before charging. However, nickel-metal hydride rechargeable dell latitude pp01l battery can reach more than 700 times, some good quality products up to 1200 times charge and discharge, so that more and lithium-ion batteries, lithium batteries live longer than nickel-metal hydride batteries, but also the price of nickel-metal hydride battery much lower than the lithium dell inspiron m501 battery. This is the nickel-metal hydride batteries can be the reason for the corner of the market.
Currently on the market, whether a lithium-ion or nickel metal hydride battery, the size of its capacity in mAh units are, it's Chinese name is ma. MAh size is directly related to the use of laptop time. The greater the laptop but not the longer battery life, which also linked to the notebook's components to determine, such as: CPU, graphics card, etc., using the Centrino CPU, ATI-MOBILITY RADEON graphics cards and many other hardware and use of energy-saving technology P4 CPU, NVIDIA notebook graphics cards compared with the same capacity battery, the former use of time much longer than the latter.
next blog: Worker Captures Alleged Battery Park City Burglar
source from blog: http://batteru.blogspot.com/
2011/12/22
2011/12/18
How to Keep Your Laptop Battery in Good Working Condition
Most laptop batteries just don't last as long as they should because the rightful owner doesn't take the necessary steps to keep it operating properly. Just a few normal maintenance of the laptop battery can certainly make a big difference in how long your battery will last both in short term life span and long term as well. Here are a few tips on how to take care of your battery to ensure you get the absolute most out of it.
The first point to consider is the fact that you should never use or store your HP Compaq Business Notebook 6715b Battery in very extreme conditions. For instance, never leave your laptop in the trunk of your car when it is either freezing out or in the middle of a hot summer day. You shouldn't even leave it in your car period. Make sure it is only used in room temperature conditions and also away from humid and wet conditions like those that exist in a steamy shower or bathroom.
If you are in the market for a laptop that only has a long lasting battery, consider buying one that is smaller and lighter in weight. These ultra thin or compact laptops generally will last longer than their bigger and bulkier counterparts.
Be aware as well that you can always adjust the power settings in your control panel to make the Acer Aspire 5920 Battery last longer. You will of course be somewhat limited in the functions that your computer can process and it will also operate at a much lower speed than normal.
There is an easy way to clean your battery so that it doesn't develop any rust or debris. Simply take a cotton swab or Q-tip with a dab of rubbing alcohol and gently wipe off all of the connectors. Make sure to completely dry the battery before you ever attempt putting it back in the computer.
Every few weeks you want to make sure to drain your battery completely and then let it charge up all the way. This is just a natural process that your Acer Aspire 4738z Battery needs to go through in order to maintain its long battery lifespan.
If all else fails and your laptops battery just isn't lasting as long as it should, it may then be time to think about just buying a new battery. I always do a search online to find a suitable battery for my laptop. Ordering from the manufacturer itself will ensure that you do in fact get the right battery that will work properly in your laptop. If you end up getting the wrong Compaq Presario cq60 Battery, it could ultimately damage or completely ruin your laptop. So always be careful and know what you are buying before you spend any money.
The first point to consider is the fact that you should never use or store your HP Compaq Business Notebook 6715b Battery in very extreme conditions. For instance, never leave your laptop in the trunk of your car when it is either freezing out or in the middle of a hot summer day. You shouldn't even leave it in your car period. Make sure it is only used in room temperature conditions and also away from humid and wet conditions like those that exist in a steamy shower or bathroom.
If you are in the market for a laptop that only has a long lasting battery, consider buying one that is smaller and lighter in weight. These ultra thin or compact laptops generally will last longer than their bigger and bulkier counterparts.
Be aware as well that you can always adjust the power settings in your control panel to make the Acer Aspire 5920 Battery last longer. You will of course be somewhat limited in the functions that your computer can process and it will also operate at a much lower speed than normal.
There is an easy way to clean your battery so that it doesn't develop any rust or debris. Simply take a cotton swab or Q-tip with a dab of rubbing alcohol and gently wipe off all of the connectors. Make sure to completely dry the battery before you ever attempt putting it back in the computer.
Every few weeks you want to make sure to drain your battery completely and then let it charge up all the way. This is just a natural process that your Acer Aspire 4738z Battery needs to go through in order to maintain its long battery lifespan.
If all else fails and your laptops battery just isn't lasting as long as it should, it may then be time to think about just buying a new battery. I always do a search online to find a suitable battery for my laptop. Ordering from the manufacturer itself will ensure that you do in fact get the right battery that will work properly in your laptop. If you end up getting the wrong Compaq Presario cq60 Battery, it could ultimately damage or completely ruin your laptop. So always be careful and know what you are buying before you spend any money.
2011/12/16
Compaq presario cq50 battery
Brand new, High-quality replacement HP Compaq Presario CQ50 battery, meet or exceed original battery , it is produced by high-tech laptop battery factory who had 10 years OEM/ODE production experience, replacement HP Compaq Presario CQ50 battery adopt brand new A-class cells(eg:Sanyo, Samsung), no Memory Effect, it can be charged/discharged 500-800 cycles.
We offer superb pre-sales and after-sales service, warranty this Compaq Presario CQ50 battery full 1 year and 30-days money back,100% OEM compatible with the original Compaq Presario CQ50 laptop battery. Also our Compaq Presario CQ50 laptop battery have take rigid test to ensure stability and safety for users before out of the battery manufactory. Usually this high capacity( 6 Cell 5200mAh ) Compaq Presario CQ50 battery offer same even higher utilisation period than that of the original Compaq Presario CQ50 battery.
HP Compaq Presario CQ50 battery fit machine:
for COMPAQ Presario CQ40,Compaq Presario CQ60, CQ60-100, CQ70, CQ45, CQ50, CQ70-100 Series,for HP HDX16-1140US, Pavilion HDX16t, dv4, dv4-1000, dv5/CT, dv5t, dv5t-1000, dv6z, dv6z-1000, dv5z, dv5z-1000, dv6t, dv6t-1000, dv6t-1100, Pavilion HDX X16-1000, Presario G50, Presario HDX16, Pavilion dv3500, dv5-1000, dv6 Series, Presario CQ50-100, HP G70-100 Series, Pavilion G50-100, G60, G60-100, G70.
HP Compaq Presario CQ50 battery compatible part number:
HSTNN-CB72, HSTNN-DB72, HSTNN-IB72, HSTNN-C51C, HSTNN-Q34C, HSTNN-W48C, HSTNN-UB73, KS524AA, EV06047, EV06055, 498482-001, 485041-001, 485041-003, 462889-121, 462890-121, 462890-421, 482186-003, HSTNN-IB72, HSTNN-N50C, HSTNN-W49C, HSTNN-W50C, HSTNN-UB72.
related battery store:
next blog: ad-acid battery industry take advantage of lithium stop large-scale subsidence
source from blog: http://batteru.blogspot.com/
Subscribe to:
Posts (Atom)